Marlex Mx10 Flash File 6.0 Firmware MT6580 100% Tested Rom
Marlex Mx10 Flash File 6.0 Firmware MT6580 100% Tested Rom
MARLEX MX10 FIRMWARE 100% TESTED
MT6580__alps__V8__keytak6580_weg_l__6.0__ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24
MARLEX MX10 FLASH FILE 100% TESTED
MARLEX MX10 STOKE ROM 100% TESTED
Reading Flash Content now ...
xGPT : Normalize settings Ok!
Brand : alps
ProdName : full_keytak6580_weg_l
ProdModel : V8
Device : keytak6580_weg_l
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24
[Read Ok] : preloader_keytak6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6580 / V1.1.2 / keytak6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1358 MiB
Scatter saved to : C:\Users\user\Desktop\marlex mx10\MT6580__alps__V8__keytak6580_weg_l__6.0__ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24\
All done!
How to Flash :
1: Download and extract the firmware on your computer.
2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
3: Install the USB Drivers (skip if drivers are already installed).
4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
5: Connect your Smartphone to the computer using the USB Driver.
6:Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
7: Green Ring will appear at the end of successful Flash.
Important Notes: MUST BACKUP AFTER FLASH!
No comments