Huawei Clone P30 pro Flash File 8.1 Firmware MT6580 Tested Rom
Huawei Clone P30 pro Flash File 8.1 Firmware MT6580 Tested Rom
HUWEI CLONE P30 PRO FIRMWARE 100% TESTED
MT6580__lmkj__P30_pro__P30_pro__8.1__ALPS.L1.MP6.V2_WEG.L_P73
HUAWEI CLONE P30 PRO FLASH FILE 100% TESTED
HUAWEI CLONE P30 PRO STOKE ROM 100% TESTED
Reading Flash Content now ...
xGPT : Normalize settings Ok!
Brand : lmkj
ProdName : P30 pro
ProdModel : P30 pro
Device : P30 pro
AndroidVer: 8.1
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_WEG.L_P73
[Read Ok] : preloader_aeon6580_weg_l_l200.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6580 / V1.1.2 / aeon6580_weg_l_l200 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1334 MiB
Scatter saved to : C:\Users\user\Desktop\p30 pro\MT6580__lmkj__P30_pro__P30_pro__8.1__ALPS.L1.MP6.V2_WEG.L_P73\
All done!
MT6580__lmkj__P30_pro__P30_pro__8.1__ALPS.L1.MP6.V2_WEG.L_P73
How to Flash :
1: Download and extract the firmware on your computer.
2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
3: Install the USB Drivers (skip if drivers are already installed).
4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
5: Connect your Smartphone to the computer using the USB Driver.
6:Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
7: Green Ring will appear at the end of successful Flash.
Important Notes: MUST BACKUP AFTER FLASH!
No comments